Hello again,
I enjoy flying the Bf-109 series aircraft. Due to the massive engine torque, I try to trim the aircraft using the aileron trim and rudder trim with little effect. I have tried to trim the aircraft with the easy settings on to be sure that I wasn't doing anything wrong and have found that there is little, if no effect at all.
Is there something I can do that will help control the aircraft unloaded, that is, with no joystick controlling, that will allow for unloaded flight? or is the BF109 such an aircraft that when full throttle is applied there is nothing to do for the torque?
This is something that I am getting used to. I would like to fly without using auto pilot to keep in formation, but having to make constant controller input is sometimes frustrating.
If there are trim surfaces on the Bf109, which ones are there? I have read that the Bf109 does not have have an elevator trim. Also, if I do trim the aircraft, how many times must I press the buttons to trim(the default is CTRL+left arrow key).
Thanks for your support.